Eternaleds LumiStick - 12" 4.5W LED Light Bar
The Eternaleds LumiStick is one of the brightest and easiest to install LED Under Cabinet Lights around. It's an LED strip light that uses 18 High Power LEDs to give you about 50 watts of light using only 4.5 watts. Since it uses LEDs it lasts 50,000 hours which means you'll almost never have to replace it once it's installed. Also it doesn't get hot unlike incandescent bulbs and doesn't bulge out like unsightly low-profile fluorescent bulbs.
It comes with a 5 foot cable, and multiple installation options (screws and magnets). It can be linked together and installed at multiple angles onto a counter top or it can be tilted upwards towards the ceiling for cove lighting.
Don't settle for less. Lumens is a measure of overall brightness. The LumiStick gives 360 Lumens. Compare this to our competitors and you'll see it's 2 to 3 times brighter while costing close to the same.
Multiple Mounting Options
Mounting the Lumistick is very simple. Built into the back of the both ends, is a small magnet, so you can mount directly onto any metallic surface without extra accessories. We've also included 2 mounting accessories:
 1. Metal Plates with 3M Double-Sided tape - Simply attach the plates to the Lumistick, remove the double sided tape and stick it to wherever you want. 2. Mounting Screws - Simply mount the LumiStick using the attached screws and screw holes available on the LumiStick. This option gives you the added ability to adjust the angle of the Lumistick (see pictures below)
 |
You can also rest the LumiStick Facing upwards, and adjust the hinges for cove lighting. |
Live action shot of the Eternaleds LumiStick
Accessories
|
The 12W adapter (sold separately) can power 2 LumiSticks (requires 4-way connector). |
 |
|
The 36W adapter (sold separately) can power up to 8 Lumisticks (requires 4-way connector). |
 |
|
Here's a picture of the 4-way connector for connecting multiple Lumisticks. It is 22 inches long. |
 |
How to Buy
Here are some examples to help you:
| If you need: |
You will need to buy: |
|
1 LumiStick |
1 x 12W adapter, 1 x LumiStick |
|
2 Lumisticks linked together |
1 x 12W adapter, 1 x 4-way connector, 2 x Lumistick |
|
3-4 Lumisticks linked together |
1 x 36W adapter, 1 x 4-way connector, 3-4 x Lumisticks |
|
5-7 Lumisticks linked together |
1 x 36W adapter, 2 x 4-way connector, 5-7 x Lumisticks |
|
8 Lumisticks linked together |
1 x 36W adapter, 3 x 4-way connector, 8 x Lumisticks |
|
9 or more Lumisticks linked together |
You will need more than one adapter. Combination of the above or call us for help. |
|